Seven Possible Problems That Are Preventing Your Garage Door From Working

If your garage door isn't working right, you naturally want to find out why as soon as possible to restore your garage door to working order.

There are a limited number of issues that cause most garage door malfunctions. The following are seven possible problems that are among the most common causes of garage door malfunctions:

The springs are broken.

Garage door assemblies include numerous types of springs that are essential to the garage door's functioning. These include extension and torsion springs.

If a garage door won't go up, it could be because the extension or torsion springs are broken. In this case, it will be necessary to replace the springs to restore the garage door to proper working order. 

The battery in the remote control needs to be replaced.

One of the simplest and easiest to repair issues is a dead battery in the remote control for the garage door. If this is the problem, then simply replacing the battery will remedy the situation. 

There are alignment problems in the track.

The garage door track can become misaligned through impact damage or wear and tear over time. Alignment problems prevent the garage door from opening and closing. Replacing or adjusting the track can fix this problem. 

There are alignment problems in the photo-eye.

Garage doors include a photo eye on either side that stops the garage door from coming down if there are objects detected in the garage door's path. If the photo eye becomes misaligned, the garage door will not close properly. In this case, the photo-eye equipment could require replacement. 

The cables have broken.

Some garage door systems run by using cables that raise and lower the garage door. These cables can weaken over time and could eventually snap through regular wear and tear. If this happens, the cables need to be replaced before the garage door will function properly again. 

You've accidentally switched on the disconnect switch.

Garage doors include a disconnect switch that allows the garage door to be manually opened and closed when the opener stops working. When this switch is enabled, the garage door can no longer be controlled by the garage door opener.

Fortunately, this problem can easily be corrected by disabling the disconnect switch. 

The door's path is obstructed.

If there are any obstructions in the garage door track or path, the garage door won't close properly. One of the first steps in troubleshooting garage door problems is checking for any obstructions in the door's path. Once the obstructions are removed, the door should function properly once again.  

For more information, contact a garage door services company.

Share